SKU: SMX1200XLHG Category:

Tripp Lite SmartPro 230V 1kVA 750W Medical-Grade Line-Interactive Tower UPS with 6 Outlets, Full Isolation, Expandable Runtime

* Images are for illustrative purposes only.

£833.18 £694.32 Ex. VAT

Out of stock

Finance/leasing available for orders over £1000 Inc VAT

Free mainland UK shipping on orders over £150 Ex VAT

Tripp Lite’s SMX1200XLHG medical-grade UPS system provides dependable battery backup and is fully compliant with UL 60601-1 regulations when plugged into a hospital-grade outlet, making it ideal for use in patient-care vicinities. The 1kVA/750W capacity provides up to 27.5 minutes of runtime for a half load, or 11 minutes for a full load so you can work through short power failures and perform an orderly system shutdown in a prolonged blackout.

Built-in line-interactive voltage regulation corrects brownouts as low as 155V and overvoltages as high as 274V to normal 230V nominal output, without drawing battery power. The SMX1200XLHG’s built-in isolation transformer with Faraday shield offers full isolation and removes common mode noise while maintaining full AC surge suppression in all modes. Cumulative leakage current of all connected equipment is less than 100 microamps.

This UPS system features six IEC320 C13 hospital-grade outlets and has a hospital-grade IEC320 C14 plug on a 15 cm (6 in.) dongle. All six outlets provide both backup protection and surge protection, rated to 340 joules.

The SMX1200XLHG also features diagnostic LEDs, as well as a USB port and a DB9 serial port that work with Tripp Lite’s included PowerAlert software for safe, unattended system shutdown and file saves in the event of a prolonged power failure.

Provides Ideal UPS Backup in Healthcare Facilities

● Compliant with UL 60601-1 standards for use in patient-care vicinities, when plugged into a hospital-grade outlet
● Built-in isolation transformer with Faraday shield offers full isolation and removes common mode noise

Battery Backup and Full Surge Protection

● 27.5 minutes runtime for half load (375W); 11 minutes for full load (750W)
● All six hospital-grade outlets provide surge protection rated to 340 joules
● EMI/RFI noise filtering ensures equipment runs smoothly without line noise interference
● Resistant to electrostatic discharge

LEDs and Audible Alarms Keep You Aware of Power Status

● Indicator lights on the front of the unit show you when the UPS is on and supplying utility power, when operating in voltage correction mode or in battery mode, relative load level and low-battery warning
● Audible alarms alert you to power failure, overload and low battery conditions; the alarm’s mute/quiet mode ensures patients are not disturbed

Saves Your Files, Even When You’re Away

● Works with Tripp Lite PowerAlert software (included) to enable safe, unattended system shutdown and files saves during prolonged power failures
● Connects to your computer via either the DB9 port or USB port

● Supports a half load up to 27.5 minutes; full load up to 11 minutes
● Six IEC320 C13 hospital-grade outlets and IEC320 C14 hospital-grade plug
● Leakage current less than 100 microamps
● 340 joule surge suppression rating protects connected equipment
● Alarm mute/alarm quiet control is ideal for use around patients

Package Includes

● SMX1200XLHG 1kVA/750W Medical-Grade Tower UPS System
● USB monitoring cable, 1.8 m
● DB9 serial monitoring cable, 1.8 m
● PowerAlert software
● Owner’s Manual


Feature Feature Value
Output power capacity 1000 VA
Output power 750 W
Input operation voltage (min) 230 V
Input operation voltage (max) 230 V
Input frequency 50/60 Hz
Output operation voltage (min) 230 V
Output operation voltage (max) 230 V
Maximum current 10 A
Surge energy rating 340 J
EMI/RFI noise filtering Y
Surge protection Y
Power protection features Over voltage,Under voltage
Audible alarm(s) Y
AC outlet types C13 coupler
Power plug C14 coupler
AC outlets quantity 6 AC outlet(s)
Typical backup time at full load 11 min
Typical backup time at half load 27.5 min
Battery recharge time 4.5 h
Hot-swap battery Y
Cold start Y
Form factor Tower
Product colour White
LED indicators Y
Certification CE, IEC 60601-1
Operating temperature (T-T) 0 – 40 °C
Storage temperature (T-T) -15 – 50 °C
Operating relative humidity (H-H) 0 – 95%
Width 190 mm
Depth 231 mm
Height 323 mm
Weight 20.7 kg
Interface USB; DB9
Surge protection

Y

Width

190 mm

Interface

USB; DB9

Maximum current

10 A

EMI/RFI noise filtering

Y

Hot-swap battery

Y

Form factor

Tower

Weight

20.7 kg

Before you go...

Before you leave, here is £5 towards your next order over £150 Ex VAT! Just click the button below to apply the coupon...