SKU: VAP903-K Category:

Draytek VigorAP 903 (VAP903-K) Managed 11ac Wave 2 Business-class Mesh Wireless Access Point

The VigorAP 903 is a dual-band 802.11ac Wave 2 Mesh Wireless solution, designed to eliminate wireless drop outs, stuttering videos, slow download speeds, poor signal and Wi-Fi dead zones.

* Images are for illustrative purposes only.

£153.30 £127.75 Ex. VAT

Availability: 464 in stock

Finance/leasing available for orders over £1000 Inc VAT

Free mainland UK shipping on orders over £150 Ex VAT

Draytek VigorAP 903 Overview:

VigorAP 903 is a high-performance Mesh Wireless solution, designed to expand the wireless coverage, eliminate Wi-Fi dead zones and significantly reduce the cost of network deployments. It can also be used as a traditional access point either managed or stand alone so has the flexibility to be used how you need it.

The VigorAP 903 is a dual-band 802.11ac Wave 2 Mesh Wireless solution, designed to eliminate wireless drop outs, stuttering videos, slow download speeds, poor signal and Wi-Fi dead zones. One access point acts as the controller (Mesh root) and in total up to 8 access points create an easy to manage wireless mesh. Extend coverage without running expensive cabling.

DrayTek VigorAP 903 Specification:

Physical Interfaces/Controls

  • 5 x Gigabit Ethernet LAN Ports
  • USB 2.0 Port
  • WLAN On/Off & WPS Button
  • Factory Reset Button
  • 2 x Dual-Band Omni-directional RP-SMA Antennae
  • Wireless Performance

    • AC1300 Class Wireless Access Point
    • 5GHz: PHY Rate 866Mb/s
    • 2.4GHz: PHY Rate 400Mb/s
  • Wireless LAN Compatibility

    • IEEE 802.11ac (Wave 1 & 2) / a / b / g / n
    • Frequency Band 2.4 GHz & 5.8Ghz – Simultaneous Operation
    • Up to 64 clients per radio
  • 2.4GHz Wireless LAN Features

    • 802.11b, 802.11g, 802.11n
    • 20 / 40 MHz
    • Up to 400Mb/s total Wi-Fi throughput (PHY Rate):
      • 802.11b/g/n: 300Mb/s PHY rate (150Mb/s per Spatial Stream)
      • 256-QAM: 400Mb/s PHY rate (200Mb/s per Spatial Stream)
  • 5Ghz Wireless LAN Features

    • 802.11ac (Wave 1 & 2) / 802.11n / 802.11a
    • 20 / 40 / 80 MHz
    • Extended 5Ghz Band – Channels 36-48, 52-64, 100-140
    • DFS/TPC Support
    • Multi-User MIMO – New!
    • Up to 866Mb/s total Wi-Fi throughput (PHY Rate):
      • 802.11a/n: 300Mb/s PHY rate (150Mb/s per Spatial Stream)
      • 802.11ac: 866Mb/s PHY rate (433Mb/s per Spatial Stream)
  • Security Features

    • Wireless Encryption : WPA2 (802.11i) Encryption
      • also supports WPA/WEP (Not recommended)
    • Built in 802.1x server (PEAP / EAP-TLS)
    • 802.1x RADIUS Proxy (PEAP / EAP-TLS)
    • PMK Caching & Pre-authentication
    • Wireless Client Isolation
    • Control Isolation of 2.4GHz and 5GHz bands
    • Hidden SSIDs (Selectable)
    • WPS – WiFi Protected Setup
    • MAC Address Filtering (ACL) – Up to 256 entries
    • Mobile Device Management
    • EAPOL Key Retry – New! Disable EAPOL Key Retry to protect unpatched WLAN clients from KRACK
  • Wireless Control Features

    • Wireless Client Status List in WUI
    • Client Limit per radio
    • Client Limit per SSID – New!
    • Up to four distinct SSIDs (for VLANs) for each frequency band (2.4/5Ghz)
    • MAC Cloning
    • Built-in DHCP Server & DHCP Relay
    • Trusted DHCP Server IP for WLAN – New! – Only specifed DHCP server IP can assign IP addresses to WLAN clients
    • 802.1q VLAN
    • Station Control – Time limit wireless connectivity per Station (e.g. 1 hour) & set allowed Reconnection time (e.g. 1 day)
  • Wireless Performance Optimisation

    • Airtime Fairness
    • Band Steering
    • AP-Assisted Client Mobility
    • WMM (Wireless MultiMedia)
    • Bandwidth Management (Per Station / Per SSID)
  • Diagnostic Features

    • System Log
    • Speed Test
    • Traffic Graph – AP Traffic & Per Station
    • Data Flow Monitor – View live traffic usage per WLAN client
    • Wireless LAN Statistics
    • Interference Monitor – Built-in Site Surveyor
  • Management

    • Web Interface (HTTP/HTTPS)
    • DHCP Client
    • TR-069 Control (For VigorACS or other TR-069 platform)
    • CLI (Command Line Interface) – Telnet
    • Firmware upgrade by TR-069/HTTP
    • Central AP Management (from compatible DrayTek router/controller)
    • SNMP v2, v2c, v3
    • Management VLAN
    • LED Control (enable/disable/schedule)
    • Configuration File Export (with password) & Import
    • Wireless Auto On/Off – New! – Sound alert / Disable Wireless if VigorAP is unable to ping specified host
  • Power Requirements

    • Maximum Power Consumption: 12 Watt
    • DC 12V via external 100-240v AC/DC PSU (supplied)
    • 802.3af PoE via LAN port A1. Requires PoE injector or a PoE switch such as the VigorSwitch P2121
  • Environmental & Physical

    • Operating Temperature : 0 ° C to 45 ° C
    • Operating Humidity: 10% to 90% (Non-condensing)
    • Physical Dimensions: 107mm (W) x 167mm (H) x 45mm (D)
    • Physical Dimensions with Aerials: 107mm (W) x 305mm (H) x 45mm (D)
    • Weight : 370g
    • Fitting: Wall Mountable or Free Standing
    • Pack Contents: VigorAP 903 access point, two RP-SMA Omnidirectional aerials, Quick Start Guide, DC 12V PSU
    • Warranty: Two (2) Years RTB
Brand

Reviews

There are no reviews yet.

Be the first to review “Draytek VigorAP 903 (VAP903-K) Managed 11ac Wave 2 Business-class Mesh Wireless Access Point”

Before you go...

Before you leave, here is £5 towards your next order over £150 Ex VAT! Just click the button below to apply the coupon...