AT-HDVS-150-TX | Atlona Technologies

This unit can only be used in conjunction with the CLSO 824 or HDVS-200-RX

Switcher for HDMI and VGA Inputs with HDBaseT Output
The AT-HDVS-150-TX is a 3◊1 Switcher for HDMI and VGA Inputs with HDBaseT Output. It features two HDMI inputs plus a VGA input with 3.5mm audio connector. Designed as a remote input device for the AT-UHD-CLSO-824 matrix switcher the AT-HDVS-150-TX combines the benefits of a switcher with built-in auto-switching and the advantages of long-distance HDBaseT signal extension over a single cable. HDMI signals up to 4K/UHD @ 60Hz with embedded audio VGA input signals up to 1920◊1200 video and control signals can be extended up to 230 feet (70 meters). The switcher enables auto display on/off auto-switching along with other features. The switcher receives power from the AT-UHD-CLSO-824 using Power over Ethernet. The AT-HDVS-150-TX is ideal for long distance transmission and display control in corporate or educational settings using analog and digital sources.

Remote Input Extension
The Atlona AT-HDVS-150-TX switcher expands the input capabilities of the AT-UHD-CLSO-824. Each remote switcher provides input access for up to three devices with controls for input selection and can control the power state of a display or projector when used with a third party control system. The HDVS series is designed to smooth the transition from analog to digital displays allowing advanced HDMI display devices to be used with legacy VGA sources. The series also adds the simplicity and performance of HDBaseT technology to eliminate multiple cable runs and signal degradation that can occur with long transmission lines. Cost-effective and easy-to-terminate category cable provides additional integration benefits.

The AT-HDVS-150-TX is ideal for professional installation in:

• Education environments – The switcher is placed on a lectern for use with remote video inputs such as a laptop and document camera. Auto-switching technology selects the active source input and routes the signal via HDBaseT to the switcher downstream.

• Corporate environments – The switcher is placed at a boardroom conference table to allow presenters to easily connect their laptops to the system. When integrated with a control system commands can be sent to activate a display from the front panel of the switcher.

3◊1 HDBaseT™ switcher
Features two HDMI inputs plus a VGA input with 3.5mm audio connector
Allows advanced HDMI display devices to be used with legacy VGA sources

Long distance HDMI extension
Transmits AV signals up to 230 ft (70m) @ 1080P and 130 ft. (40m) @ 4K/UHD using CAT6a/7 cable
Uses easy-to-integrate category cable for low-cost reliable system installation

Auto-switching
Selects active input when sources are connected or if there is a change in source power status
Eliminates need for complex control system in small AV systems

Auto display control
Automatically changes projector power state based on active or standby mode of scaler. Control signals transmitted via RS-232
Eliminates need for complex control system in small AV systems. Enables display control with AT-UHD-CLSO-824

Front panel display on/off control
Remotely controls display power state; provides alternate ‘Display Mute’ mode
Eliminates need for manual operation of display or use of IR remote control