Kingston HyperX Fury 16GB Black Heatsink (1x16GB) DDR4 3200MHz DIMM System Memory
HyperX HX432C16FB4/16 is a 2G x 64-bit (16GB) DDR4-3200 CL16 SDRAM (Synchronous DRAM) 1Rx8, memory module, based on eight 2G x 8-bit FBGA components per module. Each module kit supports Intelо Extreme Memory Profiles (Intelо XMP) 2.0. Each
module has been tested to run at DDR4-3200 at a low latency timing of 16-20-20 at 1.35V. The SPDs are programmed to JEDEC standard latency DDR4-2400 timing of 17-17-17 at 1.2V. Each 288-pin DIMM uses gold contact fingers.

Updated low-profile heat spreader
The sleek-looking new heat spreader is a great upgrade for your battle station’s style.

High-performance, cost-effective upgrade
HyperX FURY DDR4 is the perfect choice for a system builder, or someone looking for an upgrade to jumpstart their sluggish system.

Intel XMP-Ready
Our engineers have predefined Intel Extreme Memory Profiles designed to maximize the performance of our memory modules, reaching speeds up to 3466MHz.

Main Features
Х Power Supply: VDD = 1.2V Typical
Х VDDQ = 1.2V Typical
Х VPP = 2.5V Typical
Х VDDSPD = 2.2V to 3.6V
Х On-Die termination (ODT)
Х 16 internal banks; 4 groups of 4 banks each
Х Bi-Directional Differential Data Strobe
Х 8 bit pre-fetch
Х Burst Length (BL) switch on-the-fly BL8 or BC4(Burst Chop)
Х Height 1.3425Ф (34.1mm), w/heatsink

Memory Capacity
16GB (1 x 16GB)

Memory Type
DDR4

Module Type
DIMM

Memory Speed
DDR4-3200MHz

Pin Configuration
288-pin

Registered/Unbuffered
Unbuffered

Error Correction
Non-ECC

CL-tRCD-tRP-tRAS
Х Default (JEDEC): DDR4-2400 CL17-17-17 @1.2V
Х XMP Profile #1: DDR4-3200 CL16-20-20 @1.35V
Х XMP Profile #2: DDR4-3000 CL16-19-19 @1.35V

Heat Sink
Yes (Black)

Working Voltage
1.2V